K 1500 Truck 4WD V8-6.5L DSL Turbo VIN F (1999)
Wastegate Solenoid: Service and Repair
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Remove negative battery cables.
2. Remove the electrical connector from the solenoid.
3. Remove the vacuum hoses.
4. Remove the solenoid mounting bolt.
5. Remove the wastegate solenoid.
INSTALLATION PROCEDURE
1. Install the wastegate solenoid.
2. Install the wastegate mounting bolt.
3. Install the vacuum hoses.
4. Install the electrical connector.
5. Install the negative battery cables.
