K 2500 Suburban 4WD V8-6.0L VIN U (2001)
1. Install the new motor encoder gasket to the transfer case.
2. Install the motor encoder to the transfer case.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install motor encoder mounting bolts.
^
Tighten the motor encoder mounting bolts to 20 Nm (15 ft. lbs.).
4. Install the motor encoder electrical connector. Ensure that the retention clips activate.
5. Install the front propeller shaft.
6. Install the transfer case shield.
7. Lower the vehicle. Refer to Vehicle Lifting.