K 2500 Truck 4WD V8-379 6.2L DSL VIN J FI (1992)
Window Seal: Customer Interest
Windows - Rear Side Window Outer Belt Seal Curls Up
Group Ref.: Body
Bulletin No.: 361010A
Date: February, 1994
SUBJECT:
REAR SIDE DOOR WINDOW OUTER BELT SEAL CURLS UP AT THE ENDS (REPLACE OUTER BELT SEAL)
MODEL:
1992-93 CHEVROLET AND GMC C/K SUBURBANS AND CREW CABS
THIS BULLETIN IS BEING REVISED TO CHANGE THE SERVICE PROCEDURE, PART NUMBER, AND LABOR OP. PLEASE DISCARD
BULLETIN # 361010.
CONDITION:
Some owners may comment that their rear side window outer belt seal curls up at the ends.
CAUSE:
The rear side window outer belt seal does not fasten securely to the sheet metal flange due to the lack of a locking mechanism on the seal.
CORRECTION:
Replace the existing belt seal with a new part (P/N 15991899).
SERVICE PROCEDURE:
1.
Roll the window down.
2.
Remove the rear side window outer belt seal.
3.
Install the redesigned outer belt seal (P/N 15991899).
4.
Secure the seal on the flange using a rubber mallet. Be sure that the tabs are locked in the holes on the belt seal flange.
SERVICE PARTS INFORMATION:
P/N
Description
QTY
15991899
Rear Window, Outer Belt Seal
1
Parts are expected to be available from GMSPO on 2/14/94.
WARRANTY INFORMATION
For vehicles repaired under warranty, see illustration.