K 2500 Truck 4WD V8-5.7L VIN R (1996)
Fuel Filler Hose: Service and Repair
Fleetside
Fuel Filler Neck
Diagram
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure. See: Service and Repair
3. Raise the vehicle.
4. Wipe the vent hose connection at the fuel tank and then disconnect the fuel filler tube and clamp.
5. Wipe the fuel filler tube connection at the fuel tank and then disconnect the fuel filler tube and clamp.
6. Remove the fuel tube attaching screws and the fuel filler tube.
INSTALLATION PROCEDURE
1. Install the fuel filler tube and the fuel filler tube attaching screws.
2. Connect the fuel filler vent hose and clamp.
3. Connect the fuel filler tube hose and clamp.
4. Reinstall the fuel tank filler cap.
5. Reconnect the negative battery cable.
6. Check for leaks.