K 2500 Truck 4WD V8-6.0L VIN U (2001)
Intake Manifold: Service and Repair
Engine Sight Shield Replacement (RPO Y91 and Z88)
Engine Sight Shield Replacement (w/RPOs Y91 and Z88)
Removal Procedure
1. Loosen the engine sight shield bolt.
2. Remove the engine sight shield from the sight shield retainer.
3. If required, remove the engine sight shield retainer bolts and the retainer.
4. Loosen the left fuel rail cover bolts.
5. Remove the left fuel rail cover.
6. Remove the surge tank/heater hoses from the clip on the right fuel rail cover.
7. Loosen the right fuel rail cover bolts.
8. Remove the right fuel rail cover.
Installation Procedure
