K 2500 Truck 4WD V8-6.0L VIN U (2001)
25. Connect the cruise control cable to the throttle blade stud.
26. Install the engine sight shield and retainer.
Removal
Intake Manifold Replacement
Removal Procedure
Important: The intake manifold, throttle body, fuel rail, and injectors may be removed as an assembly. If not servicing the individual
components, remove the manifold as a complete assembly.
1. Remove the engine sight shield and retainer.
2. Relieve the fuel system pressure.
3. Disconnect the cruise control cable from the throttle blade stud.
4. Remove the cruise control cable from the bracket.
5. Remove the accelerator control cable from the throttle blade.
6. Remove the accelerator control cable from the bracket.
