K 2500 Truck 4WD V8-6.5L DSL Turbo VIN F (1995)
Wastegate Solenoid: Service and Repair
Wastegate Solenoid
REMOVE OR DISCONNECT
1. Negative battery cables.
2. Electrical connector from the solenoid.
3. Vacuum hoses.
4. Wastegate solenoid.
INSTALL OR CONNECT
1. Wastegate solenoid.
2. Vacuum hoses.
3. Electrical connector from the solenoid.
4. Negative battery cables.
5. Perform On-Board Diagnostic (OBD) System Check. See: Computers and Control Systems/Testing and Inspection
