K 2500 Truck 4WD V8-6.5L DSL Turbo VIN F (1995)
Glow Plug Relay: Service and Repair
Glow Plug Relay
REMOVE OR DISCONNECT
1. Negative battery cables.
2. Upper intake manifold cover.
3. Wiring connector to the relay.
4. Relay mounting nuts.
5. Relay from the studs on the engine.
INSTALL OR CONNECT
1. Relay to the studs on the engine.
2. Relay mounting nuts.
Tighten
^
Nuts to 35 Nm (25 lb. ft.).
3. Wiring connectors to the relay.
Tighten
^
Wiring harness nuts to 5 Nm (44 lb. in.).
4. Upper intake manifold cover.
5. Negative battery cables.
