K 2500 Truck 4WD V8-6.5L DSL Turbo VIN F (1995)
Flywheel: Service and Repair
DUAL MASS FLYWHEEL REPLACEMENT
(MANUAL TRANSMISSION ONLY WITH L65, VIN F)
REMOVE OR DISCONNECT
1. Transmission assembly.
2. Clutch and clutch housing.
3. Bolts and washers.
4. Retainer plate.
5. Flywheel.
6. Dowel pin (if equipped).
INSTALL OR CONNECT
Position flywheel on crankshaft flange. Then coat the threads of the flywheel attaching bolts with sealant.
1. Dowel pin (it equipped).
2. Retainer plate.
3. Washers and bolts.
TIGHTEN
Bolts to 60 Nm (45 lbs. ft.).
Position clutch on the flywheel.
4. Clutch and clutch housing.
5. Transmission assembly.
