K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
Water In Fuel Sensor: Service and Repair
REMOVAL PROCEDURE
1. Remove the fuel filter (2) from the fuel filter/heater element housing (1).
2. Remove the water-in-fuel sensor from the fuel filter.
INSTALLATION PROCEDURE
IMPORTANT: The water-in-fuel sensor must only be hand tightened.
1. Install the water-in-fuel sensor in the fuel filter.
2. Install the fuel filter (2) on the fuel filter/heater element housing (1).