K 2500 Truck 4WD V8-6.6L DSL Turbo VIN 1 (2002)
4. Install the engine wiring harness assembly.
5. Install the left turbo charged air outlet hose.
6. Install the right turbo charged air outlet hose.
7. Install the air cleaner outlet duct.
8. Connect the negative battery cable.
9. Fill the cooling system. Refer to Draining and Filling Cooling System in Cooling System.
Fuel Injector Return Pipe Replacement -Left
REMOVAL PROCEDURE
1. Remove the lower valve cover.
2. Remove the return line bolts from injectors and cylinder head.
3. Remove the return line from the engine.
INSTALLATION PROCEDURE
IMPORTANT: Always install new copper gaskets on the fuel injector lines.
