K 3500 Truck 4WD V8-350 5.7L (1993)
6. Install grommet, with injector harness, to throttle body.
7. Connect electrical connectors. Ensure connectors are fully seated and latched.
8. Check to see if accelerator pedal is free, by depressing pedal to the floor and releasing, while engine is "OFF".
9. Check for fuel leaks around fuel line nuts. Apply fuel pressure by turning ignition "ON" with engine "OFF".
10. Install air cleaner assembly with new gasket.
NOTE: Ensure injectors wires are not pinched between TBI and air cleaner assembly.
11. Start engine check again for fuel leaks.