chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins for Transmission Position Switch/Sensor: > < MIL ON, Intermittent or No TCC, DTC's 62, 26 Set
Page 1
background image

Transmission Position Switch/Sensor: Customer Interest
A/T Gear Indication - Inconvenient to Read

Number:

90-46-7A

Section:

7A

Date:

August 1989

Corporate Bulletin No.:  938304

Subject:
GEAR INDICATION INCONVENIENT TO READ

Model and Year:
1990 W CAR WITH COLUMN SHIFT LEVER

TO:

ALL CHEVROLET DEALERS

Condition:

The 1990 W Car column shift indicator consists of orange bars over and under the gear designators in the instrument cluster (i.e., P,R,N,O,D,2,1). Some
very tall or short drivers may find one or the other of the two orange bars is out of their normal line of sight. Should a driver comment that they find this
condition inconvenient, a new indicator assembly is available with larger bars to enhance visibility.

Procedure:

The new indicator is used in production after VIN's L9129383 and L1118247. The indicator may be replaced using the following procedure:

1.

Remove instrument cluster from vehicle following Service Manual procedures.

2.

Remove indicator assembly from the cluster, and replace with the new indicator assembly. Use the following part numbers:

16141071

3T40 transmission

16141081

4T60 transmission

Parts are expected to be available on August 21, 1989. Until then normal part orders will not be accepted by GMSPO. Only verifiable emergency VIP
orders will be accepted. SPO will make every effort to obtain parts. All parts will be placed on 400 control to waive VIP surcharges. However, the part
will be shipped premium transportation at dealer's expense. All other order types will be canceled as incorrectly ordered while the 400 control is in place.

3.

Reinstall the cluster.

Labor Operation Number:
K5100

Labor Time:
.6 hours

All Technical Service Bulletins for Transmission Position Switch/Sensor: > < MIL ON, Intermittent or No TCC, DTC's 62, 26 Set