Lumina V6-191 3.1L VIN T MFI (1993)
Housing Assembly HVAC: Service and Repair
Module Assembly
Typical Heater System Duct Work
REMOVE OR DISCONNECT
1. Air cleaner, if necessary to access battery cable.
2. Negative battery cable.
3. Right sound insulator panel under instrument panel.
4. Electrical convenience center:
A. Remove rear screws.
B. Loosen front screw.
C. Slide out.
5. Electrical connector at motor.
6. Harness from clip.
7. Blower motor mounting screws.
8. Blower motor.
INSTALL OR CONNECT
1. Blower motor.
2. Mounting screws.
3. Harness to clip.