Lumina V6-191 3.1L VIN T MFI (1993)
Service Procedure & Claim Information
PARTS NOTE:
No parts are required to complete this campaign.
SERVICE PROCEDURES
1.
Locate Purge Solenoid Valve on back of engine (see illustration). The hoses may have been installed invertedly.
2.
Remove Purge Inlet Hose and Canister Purge Hose from the solenoid valve.
3.
Install Purge Inlet Hose (# 2) onto the top port of the valve.
4.
Install the Canister Purge Hose (# 3) onto the bottom port.
5.
Install Campaign Identification Label.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. Additional "Campaign Identification Labels" can be obtained from DAC.
Apply "Campaign Identification Label" only on a clean, dry surface.
CLAIM INFORMATION
