Lumina V6-191 3.1L VIN T MFI (1993)
Removing Pump Assembly From Control Valve Assembly.
CLEAN AND INSPECT:
^
Pump and control valve assembly mating surfaces.
INSTALL OR CONNECT
-
Oil pump assembly onto control valve assembly.
-
Attaching bolts. See figure for torque values.
-
Wiring harness and solenoid.
-
Case side cover pan.
Install Solenoids Wiring Harness
Solenoids And Wiring Harness.
INSTALL OR CONNECT
-
Solenoid harness connector and solenoid.
-
Retaining clips.
-
Case side cover, new gaskets and attaching bolts.
-
Tighten Case side cover bolts to 9 to 13 Nm (80 to 115 in lb).