Lumina V6-191 3.1L VIN T MFI (1993)
Power Window Switch: Service and Repair
Coupe
Power Window Switch Assembly
NOTICE: When removing a door trim panel or switch plate, the ignition switch must be in the OFF position This will eliminate the possibility of
snorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.
Remove or Disconnect
1. Switch assembly by prying up with a flat bladed tool.
2. Clip.
3. Connector(s).
4. Lamp socket and bulb, if present.
Install or Connect
1. Lamp socket and bulb, if removed.
2. Connector(s).
3. Clips.
4. Switch assembly by pressing in place.
