Lumina V6-3.1L VIN J (2000)
![background image](/chevrolet/lumina/v6-3.1l_vin_j/Page-2694002.png)
9. Remove the seat back.
Installation Procedure
1. Engage the inner hinge pin and the hinge bolt to the hinge support in order to install the seat back (left front, AM6).
Install the spacer and bushing (right front, AM6).
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the inner and outer pivot bolts.
Tighten the inner and outer pivot bolts to 25 N.m (18 lb ft).
3. Install the lower recliner bolts (2).
Tighten the lower recliner bolts to 25 N.m (18 lb ft).
4. Position the lower seat cushion cover over the recliner bolts (2).
5. Install the recliner tilt handle screws (2).