Lumina V6-3.1L VIN J (2000)
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the center pivot bracket (2) and screws.
Tighten the center pivot bracket screws to 3 N.m (27 lb in).
4. Install the seat back frame to the vehicle.
5. Return the seat belt to its original position.
6. Install the seat back anchor nuts (3) to the floor pan.
Tighten the rear seat back anchor nuts to 10 N.m (89 lb in).
7. Install the bolts to the seat back panel.
Tighten the seat back panel bolts to 25 N.m (18 lb ft).
8. Install the J-channel (4) to the panel.
9. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (See: Seat Cushion/Service and Repair/Rear Seat Cushion Replacement) .