chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABOUT US
Relays and Modules - Steering and Suspension > < Inflatable Restraint Sensing and Diagnostic Module <--> [Air Bag Control Module]|Specifications|Page 503

Lumina V6-3.1L VIN J (2000)

Page 3
background image

1. Install the SDM (1) to the SDM bracket (2).

NOTE:  Refer to Fastener Notice in Service Precautions.

2. Install the SDM mounting fasteners (4).

Tighten
Tighten fasteners to 6 N.m (53 lb in).

3. Install the SDM harness connector to the SDM.

4. Install the connector position assurance (CPA) to the SDM harness connector.
5. Install the carpet and the passenger front carpet retainer.
6. Install the passenger front seat.
7. Enable the SIR system.

Relays and Modules - Steering and Suspension > < Inflatable Restraint Sensing and Diagnostic Module <--> [Air Bag Control Module]|Specifications|Page 503