Lumina V6-3.1L VIN J (2000)
1. Connect the inflatable restraint steering wheel module yellow 2-way connector to the SIR steering wheel coil yellow 2-way connector.
2. Install the connector position assurance (CPA).
3. Secure the SIR steering wheel coil yellow 2-way connector to the steering wheel by inserting the thick section of the wire into the existing
retainers.
4. Position the inflatable restraint steering wheel module to the steering wheel.
5. Tighten the two screws on the back of the inflatable restraint steering wheel module using the #30 torx(R) driver or equivalent.
Tighten
Tighten screws to 3 N.m (25 lb in).
6. Connect the inflatable restraint steering wheel module coil yellow 2-way wiring harness connector at the base of the steering column.
7. Install the connector position assurance (CPA) to the inflatable restraint steering wheel module coil yellow 2-way wiring harness connector.
8. Enable the SIR system. Refer to Enabling the SIR System.