Lumina V6-3.1L VIN J (2000)
2. Hand start the transaxle mount bracket to transaxle bolts.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the transaxle bracket bolts.
Start with the forward lower bolt and work clockwise to tighten the transaxle bracket bolts to 95 Nm (70 ft. lbs.).
4. Remove the support from the transaxle.
5. Install the transaxle bracket to the transaxle mount upper nuts. Tighten the transaxle mount upper nuts to 47 Nm (35 ft. lbs.).
6. Install the left engine splash shield.
7. Install the left front tire and wheel.
8. Lower the vehicle.
