Lumina V6-3.1L VIN J (2000)
Windshield Moulding / Trim: Service and Repair
Windshield Side Reveal Molding Replacement
Windshield Side Reveal Molding Replacement
Removal Procedure
1. Pull back the front door opening weatherstrip.
Important: Pulling the molding straight out without pushing in at the bottom will cause the molding to rip.
2. Push in and pull up at the bottom of the windshield side reveal molding (1).
3. Remove the windshield side reveal molding.
Installation Procedure
1. Install the windshield side reveal molding (1).
2. Pull back the front door opening weatherstrip.
