Lumina V6-3.8L VIN K (1998)
11. Remove the adjuster actuator (1) from the following components:
^
The brake shoe
^
The brake lining (4, 5)
^
The adjusting screw (2)
12. Remove the parking brake lever (3) from the parking brake shoe and the parking brake lining. Do not remove the parking brake cable from the
parking brake lever unless the parking brake lever is to be replaced.
13. Lift the end of the return spring (2) from the parking brake shoe and the parking brake lining (1). Insert the hook end of the J 38400 between
the return spring and the parking brake shoe web. Pry or twist the J 38400 in order to lift the end of the spring out of the shoe web hole.
14. Pry the end of the return spring (2) toward the axle with the flat edge of the J 38400 until it snaps down off the shoe web onto the backing plate
.
15. Remove the parking brake shoe and the parking brake lining.
