Lumina V6-3100 3.1L VIN M SFI (1995)
Remove or Disconnect
1. Mounting plate and switch from trim panel.
2. Electrical connector.
3. Switch from mounting plate.
Install or Connect
1. Switch tabs into mounting plate slots and snap in to secure.
2. Electrical connector.
3. Switch and mounting plate to trim panel by snapping in to secure.
Sedan
Power Window Switch Assembly
NOTICE: When removing a door trim panel or switch plate, the ignition switch must be in the "OFF" position. This will eliminate the possibility of
shorting out the switch if a screwdriver, awl or metal object is used to remove the switch from the harness.
Remove or Disconnect
1. Pull cup.
2. Electrical connector.
3. Switch from pull cup.
Install or Connect
1. Switch tabs into pull cup slots and snap in to secure.
2. Electrical connector.
3. Pull cup.
Rearview Mirror Bezel
