Malibu L4-2.2L VIN F (2005)
2.
Install the mirror and cover assembly by lining up the 4 retainers and applying pressure to the outside edge of the assembly as shown in the
illustration above.
Illuminated Mirror and Cover Assembly
1.
Remove the sunshade from the sunshade retainer.
2.
Remove the cover from the fasteners and the screws.
3.
Remove the sunshade and disconnect the electrical connector for the mirror lamps.
4.
Remove the assembly by unsnapping the 4 retainers that hold the mirror and cover assembly to the sunshade as shown in the illustration above.
5.
With the assembly face down on the sunshade, remove the two wires from their routing.
6.
With a small screwdriver, apply light pressure to the assembly to unlock the circuit board as shown in the illustration
above.
