chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

ABS Automated Bleed Procedure|Page 8507 > < ABS Automated Bleed Procedure|Page 8505
Page 2
background image

2. Pressure bleed the hydraulic brake system in order to purge any air that may still be trapped in the system.

22. Turn the ignition key ON, with the engine OFF. Check to see if the brake system warning lamp remains illuminated.

23. If the brake system warning lamp remains illuminated, refer to Symptoms - Hydraulic Brakes. See: Hydraulic System/Testing and

Inspection/Symptom Related Diagnostic Procedures

Important:  DO NOT allow the vehicle to be driven until it is diagnosed and repaired.

ABS Automated Bleed Procedure|Page 8507 > < ABS Automated Bleed Procedure|Page 8505