Malibu L4-2.2L VIN F (2005)
34. Install the timing chain tensioner.
Tighten
Tighten the timing chain tensioner to 75 Nm (55 lb ft).
35. Use a suitable tool with a rubber tip on the end. Feed the tool down through the camshaft drive chant to rest on the timing chain. Then give a sharp
jolt diagonally downwards to release the tensioner.
36. Use a 24 mm wrench to hold the camshaft.
Tighten
Tighten the NEW camshaft bolts to 85 Nm (63 lb ft) plus 30 degrees.
37. Install the camshaft cover.
38. Raise the vehicle.
39. Install the engine front cover.
