Malibu L4-2.2L VIN F (2005)
2. Install the inflatable restraint sensing and diagnostic module.
3. Install the inflatable restraint sensing and diagnostic module wire harness connector.
4. Install the inflatable restraint sensing and diagnostic module nuts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the nuts to 10 N.m (89 lb in).
5. Install the console.
6. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 8 in Restraint Systems.
IMPORTANT: The AIR BAG indicator may remain ON after the SDM has been replaced. DTC B1001 may set requiring the SDM part number to
be set in multiple modules. If the indicator remains ON after enabling the SIR system, perform the diagnostic system check and follow the steps
thoroughly to ensure that the SDM is set properly. Refer to Control Module References in Computer/Integrating Systems.
