chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Suspension - Revised/New Rear Suspension Tightening Spec|Page 10071 > < Cross-Member|Service and Repair|Page 10066
Page 1
background image

Front Steering Knuckle: Technical Service Bulletins
Suspension - Revised/New Rear Suspension Tightening Spec

Bulletin No.: 05-03-09-006

Date: May 19, 2005

SERVICE MANUAL UPDATE

Subject:
Revised and New Rear Suspension Tightening Specifications

Models:
2004-2005 Chevrolet Malibu
2005 Pontiac G6

This bulletin is being issued to revise and add tightening specifications in the Rear Suspension sub-section of the Service Manual. Please replace the
current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin
on the affected page.

These tightening specifications have been revised:

Support Assembly to Body Bolts - Final Pass +60 degrees

Toe Link to Steering Knuckle Bolt - First Pass 110 N.m (81 lb ft)/Final Pass - +70 degrees

The following specification has been added:

Toe Link to Support Bolt - 110 N.m (81 lb-ft)

Disclaimer

Suspension - Revised/New Rear Suspension Tightening Spec|Page 10071 > < Cross-Member|Service and Repair|Page 10066