chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Procedures|Page 9357 > < Procedures|Page 9355
Page 2
background image

Installation Procedure

1. Install the hose to the vehicle
2. Pull the hose out through the hole in the front hinge pillar.
3. Install the grommet onto the end of the hose.
4. Install the grommet into the hole in the front hinge pillar.

5. Connect the hose to the attachments on the windshield pillar.
6. Connect the front sunroof drain hose to the sunroof drain spigot.
7. Install the headliner. Refer to Headlining Trim Panel Replacement   (See: Interior Moulding / Trim/Headliner/Service and Repair).
8. Inspect sunroof for proper operation.

Sunroof Housing Rear Drain Hose Replacement

Sunroof Housing Rear Drain Hose Replacement

Procedures|Page 9357 > < Procedures|Page 9355