Malibu L4-2.4L (2010)
1. Install the park brake warning lamp switch (2) to the park brake pedal assembly (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the park brake warning lamp switch screw (3) and tighten to 2 Nm (18 lb in).
3. Connect the electrical connector to the park brake warning lamp switch.
4. Install the left side instrument panel insulator panel. Refer to Instrument Panel Insulator Replacement - Left Side (See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Insulator Replacement - Left Side).
5. Check the operation of the park brake warning lamp switch.
