Malibu L4-2.4L (2010)
Caution: Installing the metal shaving catch plug deeper than the recommended depth will create a decrease in vacuum system performance. A
decrease in vacuum system performance will cause metal shavings to enter the engine and cause engine failure.
Caution: Installing the metal shaving catch plug above the recommended depth will cause damage to the metal shaving catch plug.
4. Ensure that the EN 45680-883 metal shaving catch plug is 3.0 mm (0.12 in) below the top surface of the cylinder bore sleeve.
Note: Before using EN 45680-881 trim tool assembly, the height of the cutting blades must be set to the proper specification. The proper
specification is that the cylinder bore sleeve flange must be flush to +0.02 mm (0.0008 in) above the block deck surface.
5. The groove side of the EN 45680-882 set gauge ring (1) should be positioned upward on a flat surface.
