Malibu L4-2.4L (2010)
13. Remove the floor jacks from under the oil pan.
14. Shake the powertrain vigorously from front to rear and allow the powertrain to settle.
15. Raise the vehicle.
16. Tighten the rear transaxle mount through bolt (1).
Tighten the bolt to 100 Nm (74 lb ft).
17. Tighten the front transaxle mount through bolt (1).
Tighten the bolt to 100 Nm (74 lb ft).
18. Lower the vehicle.
19. Install the battery tray. Refer to Battery Tray Replacement (See: Starting and Charging/Battery/Battery Tray/Service and Repair).
20. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair).