Malibu L4-2.4L (2010)
7. Remove the oil level indicator tube bolt.
8. Remove the oil level indicator tube.
9. Remove the oil level indicator tube O-ring seals, if necessary.
Installation Procedure
1. Install NEW oil level indicator tube O-ring seals, if necessary.
2. Install the oil level indicator tube.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the oil level indicator tube bolt and tighten to 10 Nm (89 lb in).
4. Raise and support the vehicle.