Malibu L4-2.4L (2010)
12. Install the friction washer, if applicable.
13. Install the timing chain drive sprocket to the crankshaft with the timing mark in the 5 o'clock position and the front of the sprocket facing.
Note:
*
There are 3 colored links on the timing chain. Two links are of matching color, and 1 link is of a unique color. Use the following procedure to
line up the links with the actuators. Orient the chain so that the colored links are visible.
*
Always use new actuator bolts.
14. Assemble the intake camshaft actuator into the timing chain with the timing mark lined up with the uniquely colored link (1).
