Malibu L4-2.4L (2010)
Installation Procedure
1. Position a NEW water pump gasket and the water pump to the engine front cover.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the water pump bolts and tighten to 25 Nm (18 lb ft).
3. Install the water pump pulley and bolts.
4. Install the drive belt. Refer to Drive Belt Replacement (See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair).
5. Tighten the water pump pulley bolts to 25 Nm (18 lb ft).
6. Fill the cooling system. Refer to Cooling System Draining and Filling (See: Cooling System/Service and Repair/Cooling System Draining and
Filling).
7. Inspect for leaks.