Malibu L4-2.4L (2010)
4. If replacing the condenser, add the specific amount of PAG(R) oil directly to the condenser. Refer to Refrigerant System Specifications (See:
Refrigerant/Specifications).
5. Install the radiator air side seals onto the condenser mounting tabs on the radiator.
6. Insert condenser mounting tabs into the radiator clips.
Caution: The bolt retaining the condenser to the radiator end tank is a special length and should be the ONLY bolt used upon reinstallation. The
use of a longer bolt will damage the radiator end tank.
Note: Replace the condenser mounting bolts and nuts.
7. Install the condenser mounting nuts.
