Malibu L4-2.4L (2010)
6. Remove the refrigerant filter from the line.
Note: Cap all A/C components immediately to prevent system contamination.
7. Remove and discard the sealing washers.
Installation Procedure
1. Uncap A/C components.
2. Install new sealing washers. Refer to Air Conditioning System Seal Replacement (See: Heating and Air Conditioning/Coupler HVAC/A/C
Coupler O-ring/Service and Repair/Air Conditioning System Seal Replacement).
3. Install the refrigerant filter into the line.
4. Install the line clip to the dash.