Malibu L4-2.4L (2010)
Camshaft Position Sensor: Service and Repair
Camshaft Position Sensor Replacement - Exhaust
Camshaft Position Sensor Replacement - Exhaust
Removal Procedure
1. Remove the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (See: Fuel Delivery and Air Induction/Air Cleaner
Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair/Air Cleaner Outlet Duct Replacement).
2. Disconnect the engine wiring harness electrical connector (5) from the exhaust camshaft position (CMP) sensor (4).
3. Remove the CMP sensor bolt. (Intake CMP shown, exhaust CMP similar).
4. Remove the CMP sensor.
Installation Procedure