Malibu L4-2.4L (2010)
4. Using the adjustable jack, raise the right side of the fuel tank.
5. Install the right side rear fuel tank strap (1) bolt.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Tighten the left side fuel tank strap (2) bolts to 20 Nm (15 lb ft).
7. Tighten the right side front fuel tank strap bolt to 20 Nm (15 lb ft).
8. Remove the support from the fuel tank.
9. Install the fuel fill pipe hose to the fuel tank.
10. Connect the fuel tank fill EVAP emission pipe quick connect fitting (2) to the fuel tank fill EVAP emission pipe (1). Refer to Plastic Collar Quick
Connect Fitting Service (See: Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting
Service).
11. Tighten the fuel fill pipe hose clamp (3) at the fuel tank to 4 Nm (35 lb in).
