Malibu L4-2.4L (2010)
10. Install the right rear frame reinforcement (3).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
11. Install the right rear frame bolts (4) and tighten to 100 Nm (74 lb ft) plus an additional 90 degrees using the J 45059.
12. Lower the vehicle.
13. Install the brake pipes to the clips.
14. Install the brake, fuel, and EVAP pipe clips (1, 2) to the studs on the front of dash.