Malibu L4-2.4L (2010)
4. Disconnect the engine wiring harness electrical connectors (2) from the ECM.
5. Remove the engine wiring harness clips (3) from the ECM bracket (4).
Caution: Control module damage may result when the metal case contacts battery voltage. DO NOT contact the control module metal case with
battery voltage when servicing a control module, using battery booster cables or when charging the vehicles battery.
6. Gently lift the ECM retainers (1) up, disengaging the retainers from the ECM (2).
7. Tilt the ECM towards the engine and remove the ECM (2) from the bracket.
Installation Procedure
