Malibu L4-2.4L (2010)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
1. Remove the fuel pump module assembly. Refer to Fuel Tank Fuel Pump Module Replacement (See: Powertrain Management/Fuel Delivery and
Air Induction/Fuel Pump/Service and Repair).
2. Disconnect the fuel level sensor electrical connector (1).
3. Disengage the locking tab (2) on the fuel level sensor by pushing inward.
4. Remove the fuel level sensor (1) from the alignment feature (2).
Installation Procedure
