Malibu L4-2.4L (2010)
Washer Fluid Level Switch: Service and Repair
Windshield Washer Solvent Level Indicator Replacement
Removal Procedure
1. Remove the front wheelhouse panel splash shield. Refer to Front Wheelhouse Panel Splash Shield Replacement (See: Body and
Frame/Fender/Front Fender/Front Fender Liner/Service and Repair/Front Wheelhouse Panel Splash Shield Replacement).
2. Disconnect the washer solvent container level sensor electrical connector.
3. Using a small flat-bladed tool, remove the washer solvent level indicator (4) from the washer solvent container (1).
4. Contain all lost windshield washer solvent into a suitable clean container.
5. Using a small flat-bladed tool, remove the level indicator seal (3) from the washer solvent container (1).
Installation Procedure