Malibu L4-2.4L (2010)
1. Install the ground cable.
2. Install the negative battery cable and engine harness leads.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the battery cable/ground cable lead nut (2) to the transmission stud. Tighten the nut to 25 Nm (18 lb ft).
4. Install the negative cable to the retainers.
5. Install tape to hold the positive cable to the negative cable.
6. Install the negative battery cable clip to the battery tray.
7. Install the negative cable ground terminal nut at the tie bar and tighten to 10 Nm (89 lb in).
8. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Battery Negative Cable Disconnection
and Connection).