Malibu L4-2.4L (2010)
Positive: Service and Repair
Battery Positive Cable Replacement
Removal Procedure
1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (See: Negative/Service and Repair/Battery
Negative Cable Disconnection and Connection).
2. Loosen the positive battery cable bolt and remove the positive battery cable from the battery.
3. Loosen the positive battery cable bolt at the junction block and remove the cable from the junction block.
4. Remove the positive battery cable clip from the battery tray.
5. Remove the tape holding the negative battery cable to the positive battery cable.
6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
7. Remove the positive battery cable nut (3) from the starter solenoid.
8. Remove the positive battery cable (1) from the starter solenoid.
9. Lower the vehicle.
10. Remove the positive battery cable.
Installation Procedure