Malibu L4-2.4L (2010)
Assembly Procedure
1. Lubricate the NEW power steering fluid reservoir O-ring seal with power steering fluid and install it onto the neck of the power steering fluid
reservoir.
2. Install the power steering fluid reservoir to the power steering pump.
3. Press the power steering fluid reservoir into the power steering pump until the neck is completely engaged.
4. Align the feet of the power steering fluid reservoir with the sides of the power steering pump.
5. Install the 2 power steering fluid reservoir retaining clips. Ensure the power steering fluid reservoir retaining clip tabs fully engage with the power
steering pump.
6. Install the power steering pump. Refer to Power Steering Pump Replacement (See: Power Steering Pump/Service and Repair/Power Steering
Pump Replacement).