Malibu L4-2.4L (2010)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the power steering hose bracket and nut (1, 2).
Tighten the nut to 5 Nm (45 lb in).
4. Compress the power steering reservoir inlet hose clamp (1) and connect the power steering reservoir inlet hose to the power steering fluid
reservoir.
5. Clean any excess power steering fluid from the vehicle and remove the drain pans.
6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).
7. Fill and bleed the power steering system. Refer to Power Steering System Bleeding (See: Power Steering Bleeding/Service and Repair).