Malibu L4-2.4L (2010)
4. Release and remove the steering wheel shroud (1).
Installation Procedure
1. Install and secure the steering wheel shroud (1) to the steering wheel.
2. Clip the steering wheel switch bezels (1) in place.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the steering wheel switch bezel bolts (2) and tighten to 2 Nm (18 lb in).
4. Install steering wheel. refer to Steering Wheel Replacement (See: Steering Column/Service and Repair/Steering Wheel Replacement)